Flexible Aluminum Foil Defrost Heater Heating Pad Element

Flexible Aluminum Foil Defrost Heater Heating Pad Element

1.Defrost or freeze protection of refrigerator or ice box 2.Freeze protection of plate heat exchangers 3.Temperature maintenance of heated food counters in canteens 4.Anti-condensation of electronic or electric control boxes 5.Hermetic compressors heating 6.Anti-condensation of bathrooms mirrors...
Product description

image001.jpg


image003(001).jpg

1.Defrost or freeze protection of refrigerator or ice box

2.Freeze protection of plate heat exchangers

3.Temperature maintenance of heated food counters in canteens

4.Anti-condensation of electronic or electric control boxes

5.Hermetic compressors heating

6.Anti-condensation of bathrooms mirrors

7.Anti-condensation of refrigerated display cabinets

8.Domestic appliances, medical

image005(001).jpg

The heating element can be either high temperature PVC or silicone insulated heating cable. This cable is placed between two aluminum sheets.The aluminum foil element has adhesive backing as standard for quick and easy fixing to the area requiring temperature maintenance.Cut outs in the material are possible, allowing for perfect fitting to the part on which the element will be mounted.

1. Long life 

2. Rapid Heating 

3. Safety, environmental protection 

4. Easy installation. 

5. Low cost with long service life and high efficiency. 

6. It is customizable include shape,surface,specification etc.

image007(001).jpg

1.Insulation resistance:500MΩ

2.Leakage current to be 0.5ma max While energized at rated voltage

3.Power tolerance:+5%,-10%

4.Voltage:12V-440V

5.Heating resistance wire is Cr20Ni80 or as custom'es requirement


RLPV

RLPG

Electrical insulation

105℃PVC

Silicon rubber

Dimension

Any dimension on request

Voltage

Any voltage on request

Output

Up to 2.5KW/m2

Tolerances

≤±5% on resistance

Insulation resistance in normal temperature

≥100 MΩ

Dielectric strength in normal temperature

1800V 2S, No flashover and break down

Leakage current in working temperature

≤0.02 mA/m

Connect strength

Heater wire and lead wire

≥36N 1min

Lead wire and terminal

≥58.8N 1min

Heater and Al-foil

400g/ 1min


Note: Temperature control

Cut out the hole in aluminum foil

Earthing of the aluminum foil

image009(001).jpg

We can manufacture the Aluminum Foil heater according to your require. Here is some picture for our products.


image022.jpg

image024(001).jpg

Related Products
Feedback

Copyright © Shengzhou Beno Electric Appliance Co.,Ltd All Rights Reserved.Tel: +86-575-83703068