Water Immersion Electric Coil Heater Element

Appliaction:

Water immersion electric coil heater element  is used for Water heater and similar home products. 

Heating element are produced using Incoloy840, stainless steel 304, 321, 310S, sheath materials

and also there is huge variety of selection of termination styles available.Defrost heater are custom designed in a various 

shapes to address client’s requirements.

Detailed Information

Feature:

1.We offer standard as well as customized models

2.We offer different tube diameters like 6.5 mm, 8 mm,  8.5mm,9mm,10.6mm,11mm& 12mm, 14mm,16mm and so on.

3.We offer different sheath materials. It can be availed in different materials like Incoloy 840, SS 304, SS 321, SS 316,

 Aluminum 

4. Ambient temperature: -60°C ~ +800°C

5. High- voltage in Test : 16,00V/ 5S

6. Firmness of connection end: ≥50N

7. Protective oxide coated element wire for long-term heater life 

8. Can be manufactured to proper length

Our Factory

Shengzhou Beno Electric Appliance Co.,Ltd specialized in the design and manufacture of the electric heating element used for various defrosting and heat preservation systems. It has many years’experience and improvement in design, test, verification, inspection, manufacture and packing and devotes itself to the perfection in the technical and economic principle. After the unceasing research and innovation, our products have a comprehensive structure type, complete specification series, and various application environments. They are widely used in different fields like the refrigeration, appliance, building, petrifaction and gardening, industrial, food processors, medical etc.

Our Product

Shengzhou Beno Electric Appliance Co.,Ltd produces various kinds of electric heating elements, such as heating tubes, tubular heaters, tubular heating elements, heater elements, defrosting heating elements, defrosting heater elements, heating plates, heating belts, heating pads, heating wires, cartridge heaters, aluminum foil heaters, flexible heating elements, flexible heaters elements and some other customized heating elements.

Technology data:

1.HI-POT TEST: 1600V/S on normal temperature

2.Insulation resistance:500MΩ

3.Leakage current to be 0.75ma max While energized at rated voltage

4.Power tolerance:+5%,-10%

5.Voltage:12V-440V

6.Diameter range:4.5mm to 20mm

7.Heating resistance wire:0Cr25Al5,Cr20Ni80 or as custom'es requirement

7.Air tubular heater wattage : ≥ 1w-5w/cm2

We can send the sample to you for free. you can test our qanlity!!