Spring Hot Runner Coil Heater

Spring Hot Runner Coil Heater

1.Spring Hot Runner Coil Heater features continuous operating temperatures up to 1200°F 2.Rapid heating and cooling occur, due to the low mass construction 3.All heating elements are sealed from contamination and the stainless steel sheath provides maximum corrosion resistance
Product description

spring hot runner coil heater

Product Description

Spring Hot Runner Coil Heater features continuous operating temperatures up to 1200°F. Rapid heating and cooling occur, due to the low mass construction. All heating elements are sealed from contamination and the stainless steel sheath provides maximum corrosion resistance. An optional internal thermocouple may be utilized for precise control.

  • Continuous operating temperatures to 1200°F

  • Intermittent operating temperatures to 1500°F

  • Rapid heating and cooling due to low mass construction

  • Heating elements sealed from contamination

  • Stainless steel sheath for corrosion resistance

Specification Date:

Standard sheath materialNi-Cr steel, for temperatures up to 1500° (815°)
Standard thermocouple.ANSI Type J
Optional thermocoupleANSI Type K
Minimum bending radiusThree times the sheath diameter
Standard square cable0.125" square
Standard rectangle cable0.080" x 0.140", 0.105" x 0.150"
Standard round cable diameters0.093", 0.125", 0.150", 0.188", 0.200", 0.250", 0.312", 0.375" - Other dimensions available
Cable diameter tolerance±0.005
Standard potting adapter0.281" / 0.250" diameter - used with heater only and heater with thermocouple leads, 20 gauge and finer  -  1/2" - used with heater only and heater with thermocouple leads, 18 gauge to 12 gauge
Standard potting adapter length1.0" - Other lengths available
Standard coil I.DFrom 3/8" up to 2 1/2" in any increments
Coil I.D. tolerances3/8” to3/4”, + 0.000”, - 0.020”  - 7/8” to 1 1/4”, + 0.000”, - 0.030"  -   1 1/2” to 2 1/2”, + 0.000”, - 0.060”
Coil lengthUp to 12” on 3/8” to 3/4” I.D.  -  Up to 16” on 7/8” to 1 1/4” I.D.  -  Up to 18” on 1 1/2” to 2 1/2” I.D.
Coil length tolerance0 to 6”: + 0, - 1/8”  -  6 to 12”: + 1/8”, - 1/4”  -  12 to 18”: ± 1/4"
Resistance tolerance± 10%
Wattage tolerance± 10%
Maximum amperageSize dependent, consult factory
Standard Voltage120 or 240 volts, for higher or lower wattages contact Durex Industries

 


Picture Show:

spring hot runner coil heaterspring hot runner coil heaterspring hot runner coil heater
spring hot runner coil heaterspring hot runner coil heaterspring hot runner coil heater
spring hot runner coil heaterspring hot runner coil heaterspring hot runner coil heater

 

Packaging & Shipping

 

There are cartons and wooden cases for customers' options.

 

Then if you have any special design for the packing, we will make them asd your design.

 

About the shippment, the cheapest shipment is MSN.

 

Then the delivery time is longer than other shipment.

 

For others, such as FEDEX and DHL, the shipment cost are a little higher.

spring hot runner coil heater
Hot Tags: spring hot runner coil heater, China, manufacturers, suppliers, factory, customized
Related Products
Feedback

Copyright © Shengzhou Beno Electric Appliance Co.,Ltd All Rights Reserved.Tel: +86-575-83703068