Exhibition

Home > Exhibition > Content
Injection Molding Machine Heating Circle Temperature Problem
Dec 20, 2017

Injection Molding Machine Heating Circle Temperature Problem

I give you three answers:

A heating coil will be heated, because it is added to the value you want to set, there may be insufficient heating power of the circle, such as 380V you use 220V, and if so then only for the

Second, the reasons for the temperature line, such as the quality of the probe and the material pipe is not good, motherboard problems,

Three errors and how much you have a relationship with the plastic, as long as the full melting of plastic can be, such as PP material, you can set to 200 degrees. The upper limit of 200 degrees / lower limit of 20 degrees


Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China

Contact:Boris Yue      

Email: boris@benoelectric.com

Contact:Charles Yu     

Email: charles@benoelectric.com

Tel: +86-575-83703068

Mob: +8613456528940

Fax: +86-575-83539727

Skype: live:borisyuecn

Wechat & Whatsapp: +8613456528940









Copyright © Shengzhou Beno Electric Appliance Co.,Ltd All Rights Reserved.Tel: +86-575-83703068