Product Categories
Contact Us
Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China
Contact:Boris Yue
Email: boris@benoelectric.com
Contact:Charles Yu
Email: charles@benoelectric.com
Tel: +86-575-83703068
Mob: +8613456528940
Fax: +86-575-83539727
Skype: live:borisyuecn
Wechat & Whatsapp: +8613456528940
Exhibition
Precautions for use tubular heaters
1, the components allowed to work under the following conditions: Air relative humidity of not more than 95%, non-explosive and corrosive gases. B. The working voltage should not be greater than 1.1 times the rated value, the shell should be effectively grounded. C. Insulation resistance ≥ 1MΩ Dielectric strength: 2KV / 1min.
2, electric heating tube should be positioned fixed, effective heat must be fully immersed in liquid or solid metal, is strictly prohibited air burning. Found that the surface of the pipe body scale or carbon, should be promptly removed and then clean, so as not to affect the heat and shorten the service life.
3, heating fusible metal or solid nitrate, alkali, asphalt, paraffin, etc., should first reduce the use of voltage, until the media is melted, to rise to rated voltage.
4, when the air heating elements should be cross-aligned, so that components have a good heat dissipation, so that the flow of air can be fully heated.
5, heating nitrate should be considered when the security measures to prevent the explosion.
6, the wiring part should be placed outside the insulation layer to avoid contact with corrosive, explosive media, water; lead wires should be able to withstand long-term part of the wiring temperature and heating load, tighten the wiring screws should avoid excessive force.
7, the components should be stored in a dry place, if the long-term placement of insulation resistance less than 1MΩ, the oven can be about 200 ℃ dry, or reduce the voltage heating, until the restoration of insulation resistance.
8, electric heating pipe outlet of the magnesium oxide powder, in the use of places to avoid contaminants and water infiltration to prevent leakage accidents.
Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China
Contact:Boris Yue
Email: boris@benoelectric.com
Contact:Charles Yu
Email: charles@benoelectric.com
Tel: +86-575-83703068
Mob: +8613456528940
Fax: +86-575-83539727
Skype: live:borisyuecn
Wechat & Whatsapp: +8613456528940
Related Industry Knowledge
- The attention item of electric wire
- Technical treatment of electric wire
- Liquid Heater
- Working principle of liquid heater
- Brief introduction of heating elements
- Classification of heating elements
- Introduction of heating board
- Working principle of heating Board
- Heating pipe
- Reference for selection of heating ...
- tubular heaters power
- The main categories of tubular heaters
- tubular heating element heaters Com...
- The main technical parameters of el...
- Electric heating tube tubular heate...
- Tubular heater Introduction
- Detailed analysis of 3D printing, r...
- How to Measure Thermocouples
- Thermocouple principle, parameters,...
- Thermocouple test easy to ignore th...
Related Products

