Home > News > Content
Ceramic Heater Performance And Use
Jan 31, 2018

Ceramic heater performance and use

Ceramic heater performance and use

Ceramic heater performance and use:

1. One is the alloy wire around the small ceramic box, the external package made of stainless steel shell. Widely used in plastic machinery, chemical fiber machinery.

2. Ceramic heater is a highly efficient heat division of the heater, excellent thermal conductivity of the metal alloy to ensure that the hot surface temperature uniformity, eliminating the hot and cold equipment. With long life, good insulation properties, mechanical properties, corrosion resistance, anti-magnetic field and so on. The external cooling surface to increase the insulation device, the sintered infrared heat dissipation surface can save electricity 30%

3. Ceramic heater is not used in the general production of mica flex line, but the use of ceramic wear wire way, so the power of the product than ordinary 0.5 to 1.5 times higher. Heating body for the import of round wire into a spring-like ceramic into the spring into the circle, the cover with stainless steel, the middle of high-temperature thermal insulation cotton (aluminum silicate fiber board) to prevent temperature leakage. Ceramic is a high-frequency ceramic heat transfer fast, hard non-friable, high temperature deformation is not easy to aging and so on.

4. One is the alloy wire cast in quartz glass as raw materials in the semiconductor. With high temperature (up to 1200 degrees), anti-corrosion, beautiful wear-resistant characteristics. Widely used in high-temperature heating stoves, semiconductor engineering, glass, ceramics and wire engineering.

5. Ceramic heater is a high-temperature long-life heater, the modern industry, increasing demand for operating temperature, ceramic heaters can adapt, especially chemical fiber, engineering plastics, plastics machinery, electronics, medicine, food As well as a variety of pipe heating;

6. Ceramic heater by the spiral resistance wire through the specially designed high-temperature ceramic tiles, precision extension of composition, can be bent, beautiful metal shell ceramic fiber insulation layer. Forming an effective high-temperature, high-power density, band-shaped heater, and flexible design easy to install.

Second, the technical characteristics: According to user needs wiring, voltage from 36V, 110V, 180V, 220V, 380V, the highest power load per square 6.5W, compared with the traditional electric energy consumption can be reduced by 30%.

Three. Ordering Information:

1. Users should provide product drawings or samples, such as no drawings or samples, must provide the product specifications, models, voltage, power and so on.

2. Ceramic heater surface to withstand the power of 2.5 to 6.5 watts / square centimeter.

Fourth, the use of Note:

1. Ceramic heater non-waterproof structure, storage and use of the installation and not with oil, water, plastic particles contact to prevent leakage.

2. Installation must be ceramic heater and the heating body is closely fit, heat the surface should be flat and complete, no rugged phenomenon.

3. After use, if found to produce coke-like surface color, it indicates that heat and heat dissipation is not balanced, should be adjusted in time to prevent burn through.

4. Heating the use of high-temperature ceramic heater, should avoid hard knock or collision with a hard object caused tile fracture, alloy resistance wire exposed operating life.

5. Installation should first check the installation location and ceramic heater specifications are consistent, the use of voltage is consistent.

V. The use of: 1. Operating voltage shall not exceed 10% of the rated value; 2. Wiring part of the heating layer, insulation layer, the shell should be effectively grounded;

Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China

Contact:Boris Yue      


Contact:Charles Yu     


Tel: +86-575-83703068

Mob: +8613456528940

Fax: +86-575-83539727

Skype: live:borisyuecn

Wechat & Whatsapp: +8613456528940

Copyright © Shengzhou Beno Electric Appliance Co.,Ltd All Rights Reserved.Tel: +86-575-83703068