Company-news

Home > News > Content
Circulating Explosion - Proof Electric Heater
May 26, 2018

Explosion-proof electric heater is based on the absorption of foreign leading technology, developed a new safe, energy efficient, can provide high-temperature thermal energy explosion-proof industrial furnace. The furnace is a kind of electric energy as the heat source, that is, immersed in the heat conduction oil in the tubular heating element heat generated by the heat transfer oil as a heat carrier, through the hot oil circulation pump forced circulation, the heat transfer to one or more with heat equipment. , Is mainly used to heat the material required to be heated, the conversion of electrical energy into a new type of heating equipment. Electric heater resistance wire is made of nickel, chromium alloy cycle explosion-proof electric heater, the temperature up to 800 ℃ or more. It is mainly composed of three sets of stainless steel shell of the electric heating tube together, they are all in the equipment on the tube board, if you need to change the electric heating pipe, you should be the leading edge of the protective cover open explosion-proof electric heater, and then correct Compression nuts skid series explosion-proof electric heater, the final removal of the electric tube on the soft wire, so that electric heating tube can be pulled out for rapid replacement.

Circulating explosion-proof electric heaters are often used for the activities of the liquid, gaseous medium temperature, insulation, heating. For example: water, superheated steam, gas heating; and heating of heat transfer oil, fuel oil, asphalt, white wax, powder and so on. When the heating medium in the pressure effect through the electric heater heating chamber, the use of fluid thermodynamic principles evenly take away the heat generated in the operation of the infinite heat, so that the heating medium temperature reaches the user technical requirements.

Recirculating electric heater is a world-class high-quality long-life electric heating equipment. Used for the activities of the liquid, gaseous medium temperature, insulation, heating. When the heating medium in the pressure effect through the electric heater heating chamber, the use of fluid thermodynamic principles evenly take away the heat generated in the operation of the infinite heat, so that the heating medium temperature reaches the user technical requirements.

The circulating electric heater is a kind of energy that is converted into heat energy to heat the material to be heated. In the operation of low-temperature fluid medium through the pipeline under the pressure effect into the import and export, along the electric heating vessel internal specific heat exchanger flow, the use of fluid thermodynamic principles of design approach, take away the heat generated in the high-temperature thermal energy, Heating medium temperature, electric heater exports to obtain technical needs of high temperature media. Electric heater internal control system according to the output port temperature sensor signal to actively adjust the electric heater output power, so that the output port of the medium temperature uniform; when the heating element over-temperature, the heating element of the independent overheating protection equipment immediately intercept heating power, to prevent Heating material over-temperature caused by coking, transformation, carbonation, serious cause heat element burned, useful to extend the life of the electric heater. Circulating type electric heater typical use of the main occasions are:

1, the chemical industry, chemical raw materials, heating, will be under pressure some of the powder boring, chemical process and eruptions boring.

2, hydrocarbon heating, including oil crude oil, heavy oil, fuel oil, heat transfer oil, oil, paraffin and so on.

3, technical water, superheated steam, molten salt, nitrogen (air) gas, water and gas, etc. need to heat up the heating fluid.

4, because the selection of leading explosion-proof structure, equipment can be widely used in chemical, military, oil, natural gas, sea channels, ships, mines and other explosion-proof places


Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China

Contact:Boris Yue      

Email: boris@benoelectric.com

Contact:Charles Yu     

Email: charles@benoelectric.com

Tel: +86-575-83703068

Mob: +8613456528940

Fax: +86-575-83539727

Skype: live:borisyuecn

Wechat & Whatsapp: +8613456528940





Copyright © Shengzhou Beno Electric Appliance Co.,Ltd All Rights Reserved.Tel: +86-575-83703068