News

Home > News > Content
Electric Heating Pipe Should Pay Attention To Matters
Jan 26, 2018

Electric heating pipe should pay attention to matters

1, the components allowed to work under the following conditions: Air relative humidity of not more than 95%, non-explosive and corrosive gases. B. The working voltage should not be greater than 1.1 times the rated value, the shell should be effectively grounded. C. Insulation resistance ≥ 1MΩ Dielectric strength: 2KV / 1min.

In this case,

    2, electric heating tube should be positioned fixed, effective heat must be fully immersed in liquid or solid metal, is strictly prohibited air burning. Found that the surface of the pipe body scale or carbon, should be promptly removed and then clean, so as not to affect the heat and shorten the service life.

In this case,

    3, heating fusible metal or solid nitrate, alkali, asphalt, paraffin, etc., should first reduce the use of voltage, until the media is melted, to rise to rated voltage.

In this case,

    4, when the air heating elements should be cross-aligned, so that components have a good heat dissipation, so that the flow of air can be fully heated.

In this case,

    5, heating nitrate should be considered when the security measures to prevent the explosion.

In this case,

    6, the wiring part should be placed outside the insulation layer to avoid contact with corrosive, explosive media, water; lead wires should be able to withstand long-term part of the wiring temperature and heating load, tighten the wiring screws should avoid excessive force.

In this case,

    7, the components should be stored in a dry place, if the insulation resistance placed for a long time less than 1MΩ, the oven can be 200 ℃ or so, or reduce the voltage heating, until the restoration of insulation resistance.

In this case,

    8, electric heating pipe outlet of the magnesium oxide powder, in the use of places to avoid contaminants and water infiltration to prevent leakage accidents.


Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China

Contact:Boris Yue      

Email: boris@benoelectric.com

Contact:Charles Yu     

Email: charles@benoelectric.com

Tel: +86-575-83703068

Mob: +8613456528940

Fax: +86-575-83539727

Skype: live:borisyuecn

Wechat & Whatsapp: +8613456528940





Copyright © Shengzhou Beno Electric Appliance Co.,Ltd All Rights Reserved.Tel: +86-575-83703068