Company-news

Home > News > Content
The Characteristics Of Oil Drum Heating Purposes
Apr 19, 2018

Tank heating is used for the lack of tanks, pipes, barrels and other equipment, heating, heat and insulation. Can be directly wound in the heated parts, easy installation and removal. Particularly applicable to the dissolution of paraffin, to prevent winter oil objects such as wax. The temperature of the heater will vary according to the environment, the material and shape of the heated object, the temperature of the heater will change, the special characteristics of the oil drum heating zone According to the requirements of production.

Electric tracing can be divided into constant power with tropical and automatic electric control with tropical. How to choose and use electric heating cable in practical engineering should be taken into account from the technical and economic point of view. Combined with the actual work experience, introduced the drum barrel heating selection principles, installation precautions and maintenance methods.

Temperature control electric cable with the corresponding tropical system is automatically adjusted with the heat output power, it will not burn due to their own heat, but because of the actual need to compensate for heat, so a new generation of energy-saving thermostat heater. Tank heating is used for the lack of tanks, pipes, barrels and other equipment, heating, heat and insulation.

Can be directly wound in the heated parts, easy installation and removal. Particularly suitable for the dissolution of paraffin, to prevent winter oil objects wax. The surface temperature of the heater when it was suspended from a static air at 20 ° C was 150 ° C. The temperature of the heater may vary depending on the environment in which it is used, the material and shape of the heated object.

The surface temperature of the silicone heater was 150 ° C when suspended in 20 ° C static air. Kneading and pelletizing The composite material mainly composed of conductive particles of stainless steel pellets and fluorine-containing resin is kneaded and cut into pellets; and the extruded core belt is extruded through an extruder, Parallel to the tin-plated copper wire electrode, the formation of flat ribbon-shaped electric heating element;

After heat treatment with a high-temperature self-limiting temperature with tropical belt; will be accompanied by tropical core belt and then through the extruder coated with a layer of fluorine plastic insulation jacket, the formation of high-temperature self-limiting temperature with tropical products; A phase change material capable of retarding or retarding the temperature rise of the material is added to the raw material in place of the conventional irradiation cross-linking to produce a stable positive temperature coefficient characteristic with a heating temperature of 130 to 150 ℃, and the output power is 40 ~ 70W / m. It has the characteristics of simple process, no pollution and more suitable for popularization and application.


Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China

Contact:Boris Yue      

Email: boris@benoelectric.com

Contact:Charles Yu     

Email: charles@benoelectric.com

Tel: +86-575-83703068

Mob: +8613456528940

Fax: +86-575-83539727

Skype: live:borisyuecn

Wechat & Whatsapp: +8613456528940





Copyright © Shengzhou Beno Electric Appliance Co.,Ltd All Rights Reserved.Tel: +86-575-83703068