News

Home > News > Content
What Is A Stainless Steel Heating Tube?
Oct 19, 2017

What is a stainless steel heating tube?

Heating tubes, we are often used in daily life, work, but do not know whether you "stainless steel heating tube" know? This paper collects and sorts out some materials, hoping that this article can be of great reference value to readers.

Brief introduction of stainless steel heating tube:

The stainless steel heating tube heats the fluid by forced convection. The material is made of stainless steel is in a head with a heater pump to pump fluid into the heating chamber, after heating in the heater, another head out, is a kind of forced circulation pump through a heating method, compared with the traditional heating methods, energy saving, scientific process, installation has obvious economic benefits easy to use.

Stainless steel heating tube product characteristics:

1., small size, high power: the electric heater mainly uses cluster type tubular heating element, each cluster type tubular electric heating element maximum power up to 5000KW.

2. thermal response fast, high temperature control accuracy, high comprehensive thermal efficiency.

3., wide range of application, strong adaptability: the cycle heater can be applied to explosion-proof or ordinary occasions, its explosion-proof level can reach B and C class, its withstand voltage up to 20Mpa. The cylinder can be installed vertically or horizontally according to the user's needs.

4. heating temperature is high: the highest design temperature of the heater can reach 850 degrees, which can not be obtained by the general heat exchanger.

5. fully automatic control: through the heater circuit design, the temperature, pressure, flow and other parameters can be automatically controlled, and can be connected with the computer, to achieve man-machine dialogue.

6., long life, high reliability: the heater is made of special electric heating material, plus the design power load is reasonable, the heater uses multiple protection, so that the heater safety and life increased greatly.

7. stainless steel tube is a metal tube shell, along the tube axis to uniform spiral electric heating wire (Ni Cr, Fe Cr alloy) the gap filling compaction with good insulation thermal conductivity magnesia, silica gel or ceramic pipe ends are sealed, the metal sheathed heating element can be heated air, mold and all kinds of liquid metal. ] evenly distributed in the high temperature high temperature electric wire of stainless steel seamless pipe, dense in the void fill in the thermal conductivity and crystallization of magnesium oxide powder properties have good insulation, this structure is not only advanced, high thermal efficiency, and uniform heating, when the high temperature resistance wire in the current date, the heat generated by the surface diffusion to the metal tube the crystallization of magnesia powder, and then pass to the heated part or the air to achieve the purpose of heating.

Product advantages:

The first 1. stainless steel heating tube processing using high temperature magnesium oxide filled well insulated, so when electrified surface insulation is not charged, the use of safety.

2. followed by the high degree of mechanization of electric heating pipe, in accordance with customer requirements, bending into a variety of shapes, light, easy disassembly.

3. the electric heating pipe has the advantages of simple structure, less material consumption, low cost, long service life, high thermal conversion rate, energy saving and energy saving.

Matters needing attention:

Electromagnetic oven, electric heater, electric heating tube furnace etc. these products to our life and work to bring great convenience, but now because of the use of stainless steel heating pipe of large power, in the process of using some operators, because of improper use of certain aspects, also caused a lot of fire.

Stainless steel heating tube

According to years of industry research, summed up the following stainless steel heating tube products easy to cause fire in several aspects:

1. Baking at high temperature for a long time will ignite flammable products on the stainless steel heating tube or near combustible;

2, you can not plug the plug of the electric wire inserted into the socket, which will easily lead to short-circuit wire;

3, such as electric wire aging damage, should be replaced immediately;

4, when the operator leave the work site for a long time, when the product plug of the stainless steel heating pipe is not removed, the fire will be caused by the continuous rise of temperature;

5, when the power failure, should immediately unplug the plug, in order to prevent unwanted fire caused by forgetting;

6, the use of multiple repair after the electric wire, will cause overload of the line fire.


Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China

Contact:Boris Yue      

Email: boris@benoelectric.com

Contact:Charles Yu     

Email: charles@benoelectric.com

Tel: +86-575-83703068

Mob: +8613456528940

Fax: +86-575-83539727

Skype: live:borisyuecn

Wechat & Whatsapp: +8613456528940





Copyright © Shengzhou Beno Electric Appliance Co.,Ltd All Rights Reserved.Tel: +86-575-83703068