Product Categories
Contact Us
Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China
Contact:Boris Yue
Email: boris@benoelectric.com
Contact:Charles Yu
Email: charles@benoelectric.com
Tel: +86-575-83703068
Mob: +8613456528940
Fax: +86-575-83539727
Skype: live:borisyuecn
Wechat & Whatsapp: +8613456528940

Silicone Rubber Compressor Crankcase Heater Heating Belt Strip
Working environment temperature of designed air-conditioner compressor is about 4° C While surround environment temperature is bellow zero air conditioner is hard to make enough heat to meet the requirement.
In situation, a subsidiary electric heater is necessarily used at end of central air-conditioner to make the supplementary heat. Our subsidiary electric heater series are the most suitable and ideal heating source designed and manufacture for this appliance, moreover, our subsidiary heater series do not need any other subsidiary equipment. They have such many obvious advantage as being easy in installing, safe in operating and maintenance.
Applied insertion to rated voltage bellow 450v,50-60HZ, related humidity≤90%. Diffuse heat after conducting at electricity in an environment temperature of -30°C-+50°C.It is generally used in central air conditioner compressor. It is also applied in cold area, and oil tube.
Picture for install on the crankcase
Insulation resistance: after putting the whole tube in water for 24 hours, insulation resistance≥1000Mohm
Dielectric test of AC1800V/1Min, no flashover happened
leakage current in working temperature≤0.1mA
power deviation:±7% at rated voltage
REMARK: The products will be 100-percent inspection when the product is finished.
Description
Heating wire | NiCr or Cu-Ni Alloy | Max.Surface Temperature | 200°C |
Tail End of Heating Body | Seal Tail End of Colloidal Silica | Min. Surface Temperature | --60°C |
Withstand Voltage | AC2500 V/min | Voltage | 110-230V |
Insulation Resistance | ≥200MN | Shape | 14,20,25,30mm |
|
How to order
1.Tell us the length of heating belt or tell us the diameter of compressor or crankcase
2.Tell us the power,we will design the width for you.
3.Tell us the length of lead wire
4.You can choose the color, Red/black/White/blue/yellow
Drawing show
The width of 2-core heating belt is 14mm, and the Max. Power is 100W/Meter
The width of 4-core heating belt is 20mm,25mm and 30mm, and the Max. Power is 150W/Meter
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |
Trade show
Pls advise below details when inquire
(1).Type of Heater
(2).Wattage and Voltage
(3).Dimension of the tube and APPROX length of the heating tube
(4).Drawing required for special configuration
(5).Working environment
As a trustworthy manufacture,we can assure you for:
Consistent&Uniform quality of products throughout the Merchandise.
Shipments well within the time agreed between us.
Most competitive prices and assuring our prooducts quality.
Our belief:
Beno company is a professional Chinese heating element manufacture.
Our focus is on quality control,making excellent before and after-sales service and enlarging product
service and enlarging product series to meet clients'requirements.
Welcome to contact with us,we are always free to answer you question.
We sincere hope to set up good businss relationships with you to create a bright future!
We can send the sample to you for free. you can test our quality!