Finned air heater
he finned air heater is designed for use in natural and forced convection space heating, our range of finned air heaters are suitable for increased heat transfer surface area and where higher wattage is required. Featuring rugged construction, these finned heaters can be used in a multitude of industrial environments. Finned tubular heaters are used for forced convection heating, air or gas heating systems. They are customized to meet your specific application needs.
Features:
1, Mechanically-bonded continuous fin assures excellent heat transfer and helps prevent fin vibration at high air velocities.
2,Tube diameter:6mm,8mm,10mm,12mm,14mm,16mm,18mm,20mm
3, Several standard formations and mounting bushings available.
3,Standard fin is SUS304,other Sheath and fin material available
4,120V, 208V, 240V, 480V available, Special voltage/wattages avaiable
6,Maximum Sheath Temperature
750℉ (400℃) – Steel 900℉ (480℃) - ST.ST./INCOLY
7,Various shape: straight type, U type, W type ,Roud type and so on
Application:
Radiant Heating
Convection - Air and Gas
Recirculation Ovens
Shrink Tunnels
Dryers
Heat Treating
Industrial Ovens
Finned electric resistance heating tubular element product advantage
1. Non-standard custom, flexible production, to meet the heating requirements of various equipment.
2. The winding type finned electric heating tube increases the heat dissipation area of the electric heating tube by winding the metal steel to accelerate the heat dissipation.
3. Our products have obtained the CE certification of the Rheinland Institute, the authoritative certification body of Germany, and are exported to all countries. [1. Understand the German Rhine Institute 2. View the CE certificate and report].
Finned electric resistance heating tubular element installation diagram or precautions
Precautions:
We should pay attention to the following points during the use of the wound finned electric heating tube:
2. The fins need to be 30-50 mm away from the nozzle.
3. The distance between the tube and the tube should not be less than 20mm when installed.
4. When heating humid air, it is recommended to use stainless steel 304 fins, which are not easy to rust.
Finned electric resistance heating tubular element wiring method description
Single pipe connected to the power supply: directly according to the voltage level of wiring, usually 220V, a fire line, a zero line; 380V, if there are only 2 binding posts, then it is connected to 2 fire lines.
Multiple pipes connected to the power supply: can be taken according to the actual situation: parallel, series, delta connection or Y-connection. If you don't understand anything, you can consult our sales customer service.
Finned electric heating resistance tubular element ordering instructions
To order a finned electric heating tube, please provide the following parameters:
1.Voltage
2. Power
3. Pipe diameter
4. Shape
5. Length
6. Lead length
7. Material
8. Fastener size
9. Fastener material
10. Fin material
We are professional electric heating elements manufacturer & supplier in China.
Our products range covers: defrost heater, defrost heating element, heating tube, tubular heater, defrost heating tube, heating pad, heating band, heating film, PI heater, Kapton heater, Film Heater, Flexible heater, band heater, heating belt, heating wire, heating cable, MICA heater, silicone rubber heater, PTC heater, ceramic heater, heat press plate, air heater, finned heater, industry heater, immersion heater, oven heater, boiler heater, glass tube heater, far infrared heating element, aluminum heating plate, aluminum foil heater, aluminum tube heater etc...
Contact Us:
Eric Xie
Tel: +86 15988295936
SKYPE: ericxie123@outlook.com
Whatsapp: +8615988295936
Wechat: +8615988295936
Email: sale@benoelectric.com
Website:www.benoindustry.com
