Die-casting furnace heating tube for a long time is not long, often not the quality of the
electric tube itself caused by a large extent and the use of maintenance is not enough to have a
great relationship, so when the quality of electric tube is good, we should first check the
following, And then to find the reasons for deep-seated failures, we do not first judge the
quality of the electric tube, why say this: because, once the electric tube broken, may not be the
quality of the problem, but the work accidentally broken off, Electric tube to take what kind of
pipe ordinary 304 stainless steel or imported 304 made. Extend a little: ordinary 304 wall
thickness is not enough (especially in high temperature work, with particular attention)
Single-head electric tube, single-head electric tube, the common mold heating electric tube
is not required to be fixed, he is directly installed in the heating hole for heat transfer. Need
to install a fixed single-head heating tube, the general way is to heat the pipe on the basis of
welding a mounting thread, generally 6 points, 1 inch and so on.
Flange type electric tube, this heating tube characteristics is relatively easy to install,
the flange installation is generally divided into flat flange installation and threaded flange
installation, flat flange installation, the need for mother flange welding in the box, And then
with the flat flange heating tube on the flange; thread flange installation is in the fixed plate
tapping, and then directly to the screwdriver flange can be screwed up.
Contact Us:
Eric Xie
Tel: +86 15988295936
SKYPE: ericxie123@outlook.com
Whatsapp: +8615988295936
Wechat: +8615988295936
Email: sale@benoelectric.com
Website:www.benoindustry.com
