Silicone rubber heating plate heating zone
product manual
Silicone rubber heater (silicone rubber heater) is a power that is heating the film, the standard thickness of 1.8mm. Heating element using nickel chrome wire or with a thickness of 0.05 mm ~ 0.10mm nickel chrome foil etching into a certain shape, two bags of thermal insulation materials, high temperature molding and aging heat treatment, and therefore has a high reliability. Is the general to graphite pulp, resistive pulp and other pulp printed on the insulation material on the electric film can not be compared.
Silicone rubber heater for the soft red can be closely attached to the surface of the film, according to various shapes and power production.
Silicone heater features
1, heating quickly, the thermal conductivity of 1W / c ㎡. Because of its small heat capacity, it can quickly turn on or off.
2, high thermal efficiency, in the case of boiling liquid, the temperature of the film itself is only slightly higher than the liquid tens of degrees, 2-3 times than ordinary electric furnace energy saving.
3, water, acid, alkali, high electrical insulation strength.
4, high mechanical strength, mechanical pressure 100kg / cm2.
5, small size, in the use of heating film almost no space.
6, easy to use, because of its own insulation, no open flame, for insulation, insulation in the process greatly simplified.
7, temperature range, from -60 ℃ ~ 200 ℃, is the general electrical reach.
8, long life, under normal conditions of use, almost permanent for continuous use. Because nickel-chromium can withstand any corrosion, and silicone surface resistance up to 100.00kg / cm2; is any kind of electric appliances can not be compared.
9, can be made into any size, you can rely on the temperature controller to assist the precise temperature control function.
Silicone heater technical indicators
1. Temperature range: -40.00 ~ 200.00 ℃;
2. Resistance value accuracy: ± 8% (whichever is greater)
3. Power density: 0.10 ~ 1.50w / cm2
4. Mechanical pressure: 100.00kg / cm2
5. Minimum bending radius: 3.20mm
● Silicone heater applications
● Industrial equipment pipelines, cans, etc. ● Outdoor communication equipment ● Medical equipment, medical equipment ● Outdoor electronic devices ● Thermal imaging of imaging equipment
● Protection of the chassis in cold and humid environments ● Industrial ovens and hot working equipment ● Layering equipment ● Containers
Contact Us:
Eric Xie
Tel: +86 15988295936
SKYPE: ericxie123@outlook.com
Whatsapp: +8615988295936
Wechat: +8615988295936
Email: sale@benoelectric.com
Website:www.benoindustry.com
