Silicone rubber heating plate is mainly composed of nickel-chromium alloy heating wire and silicone rubber high temperature insulation fabric, silicone rubber heating plate can be made according to the size of the workpiece in a variety of shapes and patterns. Silicone rubber heating plate is very thin, light weight and flexibility. With this heater, it can be in complete contact with the object being heated, allowing heat to be transferred to any desired location, improving heat transfer during handling, accelerating heating and reducing power requirements. It has good waterproof performance, fast heating, temperature uniformity, high thermal efficiency, good toughness, in line with the United States UL94-V0 level of the fire-resistant standards, easy to use, safe life of up to ten years, not aging characteristics. Silicone rubber heating plate quality is stable, anti-moisture and anti-chemical corrosion, the temperature range from -62 ~ 235 ℃, the maximum power load can be 3.1W / c ㎡, because the product is very thin, good heat transfer effect, the actual The heating element is very close to the workpiece. There are two kinds of circuit form, one is the etching circuit method, the maximum width can be done 360mm, the length is not limited; heating element for the sheet-like heating element structure, it is more than the filament heating element to provide a more uniform heat field, And the response time is fast, compared with the filament heating element, the power load is low, the service life is longer. The other is the round wire heating element arrangement method. In the industrial sector, medical, laboratory, food and aviation has a very wide range of applications.
Silicone rubber heating plate features:
1. According to customer requirements, customized various shapes and sizes (such as round, oval, vertebral ┅ ┅).
2. Silicone rubber heating plate insulation layer made of silicone rubber and glass fiber cloth compound, with high insulation performance, breakdown voltage up to 20 ~ 50KV / mm, so you can rest assured that use.
3. Silicone rubber heating plate installation is very convenient, can be vulcanized at room temperature, vulcanization installation, can also be installed according to customer requirements hole, or bundled with the form of installation.
4. Heat element: the nickel alloy heating wire wrapped in glass fiber, heating power can reach 2.1W / c ㎡, heating more uniform.
5. Moisture-resistant silicone rubber material provides longer heater life.
Installation:
1. In a flat and smooth workpiece can be used to pressure-sensitive adhesive to bond.
2. The maximum use of pressure-sensitive adhesive temperature: 150 ℃ continuous, 230 ℃ instant. Power density of not more than 0.9W / c ㎡ of the occasion.
3. coated with pressure-sensitive adhesive silicone rubber heater is best used in the factory six months after the factory, otherwise it will affect the use of glue performance.
4. Small parts can come to the factory prefabricated and vulcanized, can ensure the maximum service life of the heating plate.
Instructions for use:
1. The use of such electric devices must be noted that the continuous use of the operating temperature should be less than 240 ℃, instant no more than 300 ℃.
2. Silicone heating device can work and pressure state, that is, with the auxiliary pressure plate to close the heated surface. Good heat transfer, the work area temperature does not exceed 240 ℃, the current density of up to 3W / c ㎡.
3. Under the paste installation conditions, allow the working temperature is less than 150 ℃.
4. If the air dry conditions, subject to temperature constraints, the power density should be less than 1 W / c ㎡; non-continuous conditions, power density up to 1.4 W / c ㎡.
5. Working voltage selection to high power - high voltage, low power - low voltage principle, special needs can be listed.
Contact Us:
Eric Xie
Tel: +86 15988295936
SKYPE: ericxie123@outlook.com
Whatsapp: +8615988295936
Wechat: +8615988295936
Email: sale@benoelectric.com
Website:www.benoindustry.com
