3D Printer Kapton Foil Heater
1 Introduction of kapton foil heater
Kapton Foil Heating Element offers superior tensile strength and tear resistance, with precision heat distribution. They are ideal for extreme temperature environments, from -319° F to +392° F (-195° C to +200° C). Heaters are in stock standard at 0.0007" (0.2mm) thick and up to 20"x26" (. 508m x. 660m) areas. Watt density is 5W/in2 (0.8W/cm2) standard, with units available to 50W/in2 (7.8W/cm2).
Kapton is an organic polymer with very high dielectric capabilities, while providing superior resistance to most solvents, oils, even radiation. With low out gassing, these heaters are useful in vacuum environments. Etched foil heating elements, with 12" (305mm) long Kapton or Teflon? Leads, are standard. Silicone leads, as well as custom lengths, cord and plug sets available.
Being transparent, Kapton film also allows easy visual inspection on the internal structures. Pressure-sensitive adhesive (PSA) backing surface is standard, but NPH will customize your Kapton? Heaters with special adhesives or mounting holes, as the application requires. Mechanical fasteners such as hooks, grommets, spring-loaded latches, snaps and Velcro? Patches are also available. Minimum radius flexibility 1/32" (0.88mm) standard with weight of 1 1/2oz/ft2 (0.05g/cm2).
2 Application of kapton foil heater
1. Medical diagnostic instruments: Heat sample trays, reagent bottles, etc.
2. Stabilize optoelectronic components
3. Test or simulate integrated circuits
4. Enable cold weather operation of outdoor electronics such as laptap, ATM, LCD'S
5. Protect aircraft eletronic and mechanical devices in cold weather / area
3 Temperature Control Options of kapton foil heater
For temperature control on Kapton? Heaters, we recommends an RTD or thermocouple. Sensors are mounted to the surface of the heater and send a resistance measurement to an external controller that cycles the heater at a set temperature.
4 kapton foil heater Mounting Options:
Pressure Sensitive Adhesive
PSA is the most common option for mounting Kapton heaters. By selecting proper materials, including the release agent, you can promote a strong bond and effective heat transfer.
For more questions and sample and production inquiry, please contact us:
China Professional Electric Heating Elements Factory Manufacturer Supplier
Key Products: defrost heater, defrost heating element, heating tube, tubular heater, defrost heating tube, heating pad, heating band, band heater, heating belt, heating wire, heating cable, MICA heater, heating tube, silicone rubber heater, PTC heater, ceramic heater, heat press plate, boiler heater, glass tube heater, far infrared heating element, aluminum heating plate, aluminum foil heater, aluminum tube heater etc...
Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China
Contact:Eric Xie
Email: sale@benoelectric.com
Mob: +8615988295936
Skype: ericxie123@outlook.com
Wechat & Whatsapp: +8615988295936
Website:www.benoindustry.com
