
Other popular products:can be slightly customized
Instruction manual:
1, The power line does not distinguish between positive and negative, you can freely link power 110V.
2, When the heater is dry, low thermal efficiency, it is recommended to use with the fan.
3, Can be placed under a wet environment, but can not be placed in water.
4, For the first time, will produce a small amount of smoke, is a normal phenomenon, it will disappear within a short time.
5, Built-in 230 degrees Celsius heater chip, when dry the surface temperature of about 200 degrees Celsius, the fan blowing, the surface temperature of about 120 degrees Celsius.
6, Both ends of the product wearing bracket (PA66 high temperature nylon)
7. Test: Ambient temperature 24 degrees Celsius, the wind speed: 3.3 m / s, distance from the outlet 10 cm. Hot air temperature of about 50-60 degrees Celsius.
8, Under normal circumstances, PTC heater in a very short time after the start, it will have an impact power, which is about 1.5 to 3 times the rated power, but will rapidly decline, which is normal. Please buyers understand!
9, Life: about: 3--5 years.
We are professional electric heating elements manufacturer & supplier in China.
Our products range covers: defrost heater, defrost heating element, heating tube, tubular heater, defrost heating tube, heating pad, heating band, heating film, PI heater, Kapton heater, Film Heater, Flexible heater, band heater, heating belt, heating wire, heating cable, MICA heater, silicone rubber heater, PTC heater, ceramic heater, heat press plate, air heater, finned heater, industry heater, immersion heater, oven heater, boiler heater, glass tube heater, far infrared heating element, aluminum heating plate, aluminum foil heater, aluminum tube heater etc...
Contact Us:
Eric Xie
Tel: +86 15988295936
SKYPE: ericxie123@outlook.com
Whatsapp: +8615988295936
Wechat: +8615988295936
Email: sale@benoelectric.com
