FUNCTIONAL DESCRIPTION OF SILICONE RUBBER ELECTRIC HEATING
FUNCTIONAL DESCRIPTION OF SILICONE RUBBER ELECTRIC HEATING
Silicon rubber electric heating band function description
SZ-type silicon rubber electric heating zone
It is made of aluminum alloy and silicon rubber through special technology. It adopts imported electric heating wire and has the characteristics of flat plate type ultra-thin. The heating effect of this series heater is good. The heating element of the product adopts nickel-chromium alloy wire, heat block, long lasting. Moisture-resistant silicone rubber and non-alkali glass fiber double insulation, so that the heater insulation performance is more reliable. Aluminum auxiliary heat, so that the thermal efficiency of the heater to improve and extend its service life. Easy to install.
Technical indicators;
Dielectric strength (wire end and surface); 2000VAC
Lmin insulation resistance> 100M
Service life> 30000 hours; Working voltage AC220V
Customization
Appearance and installation dimensions;
Model - Power - Length - Width - Height - Surface Temperature
BC-50 / 50W / 150mm / 90mm / 3.5mm / 70 degrees
BC-75 / 75W / 150mm / 90mm / 3.5mm / 70 degrees
BC-100 / 100W / 185mm / 120mm / 3.5mm / 70 degrees
BC-150 / 150W / 185mm / 120mm / 3.5mm / 70 degrees
Probe dehumidification silicone rubber electric heating
Instructions for use
The probe dehumidification heating line is used to monitor the probe on the heating line to help dehumidify the probe to make it more clear image.
Features
Completely waterproof design Molded knot, very flexible
Double-layer insulator silicone rubber insulator range; -70 ℃ to +200 ℃
Technical indicators
Rated power: ± 3%
Wire length: 50-70mm
Rated power supply: 24V
With the line tension: 30N × 30S
Length of belt body: ± 3%
Ring tension: 80N × 10S
Ambient temperature: -40 ℃ +200 ℃
Pressure resistance: AC3500V
Insulation resistance: ≥200MN
Leakage current: ≤ 0.2MA
Greenhouse silicone rubber electric heating zone
Instructions for use
A Case Study on Hotbeds of Vegetable Electric Heating
Electric breeding nursery power, equipped with a temperature controller in the conditions, generally in the case of plastic film breeding, the power per square meter desirable 90-120 watts.
Total power W = Heating area * Power per square meter.
Electric heating wire root number N = total power W / electric heating red power (N rounded)
Voltage - current - power - length - maximum temperature
220V - 5 - 1000W - 120 / M - & gt;
220V - 4 - 800W - 100 / M - ≥40 ℃
220V - 3 - 500W - 60 / M - ≥40 ℃
220V - 1.1 - 250W - 30 / M - ≥ 40 ° C
380V - 2.8 - 1000W - 120 / M -?
Technical indicators
Withstanding voltage AC2500V / Min Insulation resistance ≥200Mn
Leakage current ≤ 0.2Mn Ambient temperature -40 ℃ - +200 ℃
Parallel constant power silicone rubber heating band
Applications
Buildings, cold storage and warehouse ground heating; ramp heating; gutter and roof defrost;
Features
Flexible structure, easy to bend; easy to install; combined with the overall cold tail section, no integration point.
Technical indicators
Output power 25W / m -40W / m-50W / m
Voltage -220V
Wire -0.75 square
Wire insulation - silicone rubber
Heating element - copper nickel alloy wire - copper nickel alloy wire - nickel-chromium alloy wire
Heating wire outer insulation - silicone rubber
Heating body 5mm × 7mm
Use the longest limit -65 meters -50 meters -44 meters
The distance between nodes -0.5 m
Pressure resistance-AC3500V-Insulation resistance ≥ 200mn
Pipeline silicone rubber electric heating zone
Applications
Mainly applicable to the cold regions, pipelines and solar energy for heating silicone rubber electric heating main functions for the hot water pipe insulation, thawing, snow and ice and other functions. Silicone rubber with, high temperature, alpine. Anti-aging and so on.
characteristic
According to the needs of the device to be heated free bending, winding, space occupying small size, simple and fast installation, heat body put on silicone insulators, copper braid to prevent mechanical damage, but also conductive to the ground, completely moisture, Can be in accordance with the needs of the length of the system, the core cold end.
Main Specifications
Length M - power W - length M - power W
0.5-20--50 --- 5 --- 125
0.6-20--60 --- 7 --- 175
0.7-20--70 --- 10--250
1.0 - 100 - 12 - 300
1.2-20--120--15--500
1.5-20--150--100-500
2.0-20--200-150-800
Technical indicators
Rated power ± 3% wire length 1M
Rated power supply 220V with a line tension 30N × 30S
With the body length ± 3% ring tension 80N × 10S
Ambient temperature -40 ℃ +200 ℃ pressure AC3500V
Insulation resistance ≥ 200MN Leakage current ≤ 0.2MA
Please refer to the technical indicators of user units test
Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China
Contact: Eric Xie
Mob: +8615988295936
Email:sale@benoelectric.com
Skype:ericxie123@outlook.com
WhatsApp:+008615988295936
Wechat:+8615988295936
Website:WWW.benoindustry.com
