Electric Mini Steam Iron Heating Element
The Steam Iron Heating Element, those metal components that get red-hot and generate heat, are the most important parts of any range. When the elements fail to heat properly, it's time to replace them. It's a simple procedure any electric stove owner can easily accomplish in a few minutes' time. You can usually identify a burnt-out element by blistering or small holes on the element's coils. A burner that plugs into a receptacle is easy to test, just unplug the non-heating burner, plug it into another working receptacle, restore the power to the range, and test it. If the burner works, you know its original receptacle is probably faulty. If it doesn’t work in the good receptacle, the burner is bad and must be replaced. Do not be alarmed if a new element smokes a little when you first use it. This is a factory-applied green coating, that prevents scratches during shipment, burning away.
Characteristics & Properties
* Tube diameter: Φ6mm-Φ8mm
* Tube Material: SS201, SS304, SS316, SS321 and INCOLOY800 etc
* Insulation Material: MgO
* Conductor Material: Nichrome Resistance Wire
* Wattage Density: High/Middle/Low (5-25w/cm2)
* Lead Connection Option: Threaded Stud Terminal or Lead Wire
* Lead Wire Type: 300mm Standard
Suggested Applications
* Water Deionized, Demineralized, Clean, Potable, Process
* Industrial Water Rinse Tanks
* Vapor Degreasers
* Hydraulic Oil, Crude, Asphalt
* Lubricating Oils at API Specified Watt Densities
* Air and Gas Flow
* Caustic Solutions
* Chemical Baths
* Process Air Equipment
* Boiler Equipment
Steam Iron Heating Element | |||
Not exceeding 30w/cm2 (advisable) | |||
Power | Depends on the dimension | ||
Exhaust extreme (when cold) | <=0.1mA to 242 v. | ||
Insulation (when cold) | 5 Min Ohms 500 Watts minimum | ||
Dielectric strength | 1500v. 1/sec | ||
Working temperature | 650 Deg C max. | ||
Length tolerance | +/-1.5% | ||
Diameter tolerance | -0.02 to -0.06 mm | ||
Cold areas | Depends on length and diameter 5-25mm | ||
Cut off connection tolerance | +/-15 mm | ||
Power tolerance (w) | +5 % - 10 % | ||
For more questions and sample and production inquiry, please contact us:
China Professional Electric Heating Elements Factory Manufacturer Supplier
Our Production: defrost heater, defrost heating element, heating tube, tubular heater, defrost heating tube, heating pad, heating band, band heater, heating belt, heating wire, heating cable, MICA heater, heating tube, silicone rubber heater, PTC heater, ceramic heater, heat press plate, boiler heater, glass tube heater, far infrared heating element, aluminum heating plate, aluminum foil heater, aluminum tube heater etc...
Our website: www.benoindustry.com
Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China
Contact:Eric Xie
Email: sale@benoelectric.com
Mob: +8615988295936
Fax: +86-575-83539727
Skype: ericxie123@outlook.com
Wechat & Whatsapp: +8615988295936
