The Heating Principle Of Ceramic Electric

Apr 12, 2018

Leave a message

one. Principle structure

High-temperature ceramic electric ring is not used in general mica-line production, but the use of ceramic wear wire way, so the power of the product than ordinary 0.5 to 1.5 times higher. The heating element is made of imported stainless steel and the outer cover is made of Japanese stainless steel. The middle temperature insulation cotton (aluminum silicate fiber board) is used to prevent the temperature from leaking. Ceramic is a high-frequency ceramic heat transfer fast, hard non-friable, high temperature deformation is not easy to aging and so on.

two. Main features of the product

1, fast heat transfer, heat evenly, stable work.

2, the product of high power, the use of ceramic wire way to wear power than ordinary 0.5 to 1.5 times higher.

3, long product life, due to the aging of raw materials at high temperatures slower and therefore long product life.

4, electrical strength: the voltage 1500v / 50Hz sinusoidal AC voltage test, the 1MIN no breakdown phenomenon

5, the temperature does not leak, can save energy, the cover is not hot hand touch, work safety.

6, in line with the national GB technical requirements. Power deviation + 5% ∽-10%.

7, Europe and the United States high-temperature heating wire, with heat fast, uniform heat, high temperature stability and other characteristics, can be used for a long time at 600-800 ℃.

three. Technical parameters of conventional ceramic heating coils

1. Voltage: 36V ~ 380V

2. Power: according to customer needs

3 Temperature: <1200 ℃

4. Dielectric strength: 2000V / 1 minute

5. Insulation resistance:> 5MΩ

6. Working temperature: 900 ℃ ~ 1500 ℃

Add: No. 16, Road 3, Sanjiang Industry Zone, Shengzhou, Zhejiang, China

Contact:   Eric Xie    

Mob: +8615988295936

Email:sale@benoelectric.com

Skype:ericxie123@outlook.com

WhatsApp:+008615988295936

Wechat:+8615988295936

Website:WWW.benoindustry.com


Send Inquiry